CEMS GROUP ANNOUNCES
ITS TOTAL PACKAGE SYSTEM
TP-CEMS
Designed To Deliver Maximum Advantage For Complete
System Integration
MARIETTA, GA—(Jan.
2006) Continuous Emission Monitoring Systems Group (CEMS) a division
of Air Techniques Inc. (ATI), announced toay its Total Package,
TP--CEMS as the maximum advantage for its customer's needs. TP-CEMS
delivers design and service, installation, integration, startup
and testing, and complete follow-up service for ATI systems as
well as non-ATI systems. TP-CEMS offers total flexibility to deliver
specific project needs, while integrating knowledge and expertise
to make it reliable, current, user friendly, and cost competitive.
In addition, TP-CEMS offers maintenance, data aquisition, EPA
certification testing, audits, compliance reporting, and automatic
system operation.
“Our experience
as an operating test lab plus the flexibility of independent selection
of the best instrument for each application makes ATI the CEM
system producer to choose. And, by offering customers complete
system integration and total support services, we deliver the
maximum advantage”, said Wayne Norman, Owner, ATI.
Installation
● Maintenance ● Service
● Reporting ●
Support
TP-CEMS ●
CEM System Integration - ATI works with plant or engineering
personnel to integrate a CEM System into an existing data acquisition
or control system. Depending on the application, various interface
modules are available to adapt the CEMS output to plant computer
systems for real-time display or total data acquisition and reporting
functions. All CEM system components, regardless of its configuration
are assembled and tested at our shop in Marietta, Ga. Most systems
are shipped completely assembled and ready for installation, eliminating
much of the expensive and time-consuming field installation and
wiring. Typical time from delivery to site to startup is five
working days.
TP-CEMS Follow
Up Service Package - “We provide
total service and follow-up
packages for systems supplied by ATI or for systems supplied by
others. Since ATI
operates its own testing
and monitoring division, any level of support service can be offered
from the initial
certification testing
to – certification, cylinder audits, reporting RATA’s
and maintenance,” said Norman
Packaged Systems
The CEMS Group provides customization for each system and its
space requirements of the customer’s facility. Systems can
be open rack-mounted for indoor installation
in a control room or
enclosed in NEMA 4 cabinets for
outdoor installation.
We offer a self-contained instrumentation building (CEMS shelters)
to house the CEM equipment with either local data output/display
or remote communications via serial or Ethernet with the process
control room or Engineering office.
Data Acquisition
● Reporting Capabilities
The data acquisition and reporting functions of the CEMS are selected
based upon how the data is to be used by the customer. When
the data is to be used for compliance reporting, the data acquisition
system (DAS) will consist of a data logger or PLC with computer,
software and printer. We provide on-line diagnostics and
technical support via the DAS computer. Many customers utilize
ATI’s quarterly reporting services, including fully assembled,
accurate, quality-assured data reports for customer signature
and submittal to the regulatory authority.
Automatic Operation
● Minimum Attendance
CEM Systems are designed with user-friendly maintenance features
with operator and plant maintenance personnel in mind. Incorporated
into the design of every CEMS is the ability of the system to
operate for extended periods of time with no unscheduled maintenance
required. Automatic system calibration mode is also always provided
for troubleshooting purposes and Appendix F Cylinder Gas Audits
(CGA). For multi-source applications, the data logging system
is used for the stream switching sequencing and data tracking.
Reports can be programmed to print automatically at scheduled
intervals, ready for inclusion in quarterly reports.
PEM System Integration
In addition to CEMS systems, ATI offers turnkey Predictive Emission
Monitoring Systems (PEMS) integration for gas and oil-fired boiler
applications to meet the requirements of 40 CFR 60, Subpart Db
and Title V permits. Our Sampling and Monitoring Division provides
complete system design, developmental testing, equation development,
hardware and software implementation and certification testing
of predictive systems. “ATI’s Total Package knowledge
and experience on CEMS will save our customers capital when PEMS
can be utilized’, reports Norman.
Audits ●
Testing
ATI conducts complete EPA certification testing of any TP-CEM
System for relative accuracy (RA). We can provide quarterly cylinder
gas audits (CGA) and relative accuracy test audits (RATA) as required
by 40 CFR 60, Appendix F and 40 CFR 75 quality assurance procedures.
Also, our personnel will prepare a Quality Assurance/Quality Control
(QA/QC) Manual for each CEM System according to 40 CFR 60, Appendix
F requirements.
CEMS Turnkey System Design and
Installation
Total Support
Services for CEMS
|
